SLV-70

Steel Vertical Frame

Steel Vertical Frame

Steel frames are made from a 48,3 steel tube, 2,7mm of thickness. The steel grade iSs 235 JRH, with a yield stress point Re min above 270MPa, mostly between 285-295 MPa.

- tube profile ø 48,3 x 2,7 mm, hot-dip galvanized
- one of the most important parts of a scaffolding set
- it has holders to install guardrails and a pin to set
up a wooden toe board
- different sizes of the frame are available

Catalogue noHeight [m]Width [m]Weigh [kg]
SLV-70-01-01-012,000,7418,00
SLV-70-02-04-021,500,7415,00
SLV-70-02-04-031,000,7410,50
SLV-70-02-04-040,500,748,50

  • Additional information

Before the production process each segment of the tube is sent to the institute in Bydgoszc z in order to confirm if the attestation is compatible with the product.
The steel tube is bottled on a machine specially designed for JRH steel grade.
The machine has 3 production steps to avoid tensions that may cause microcracks and disqualify the tube.
Special star pins were used in the frames in order to join the frame with the platform quickly and firmly. All the components used in the production of the frame are welded using automatic machinery a guarantee of repeatability of welds.
The frames are produced using a welding robotendowed in two workstations.